7812 Regulator: 18 V Battery to a Steady 12 V
An 18 V battery feeds a 7812 wired IN, GND, OUT left to right, and a 120 Ω load draws 100 mA. The chart shows IN at 18 V and OUT at a steady 12.0 V.
Mengajar dengan rangkaian?
Buat kelas, beri siswa rangkaian untuk dirakit, dan periksa hasil kiriman mereka. Coba gratis dengan satu kelas dan hingga 5 siswa.
Coba demo kelas gratisHow it works
What this circuit does
The 7812 turns a higher DC voltage into a steady 12 V. Here an 18 V battery feeds it and a 120 Ω resistor is the load, so 100 mA flows from OUT to ground.
How it is wired
Pins left to right, as the lab draws them:
Pin 1, IN: to the battery + terminal.
Pin 2, GND: to the battery - terminal and the ground part.
Pin 3, OUT: to the 120 Ω load; the other end of the load goes to ground.
The middle pin is GND, not the output.
What the chart shows
Switch the lab on and the chart draws the ticked boxes; you do not need to tick anything.
Ticked: IN and OUT. The chart covers 5 ms. IN is a flat 18.0 V. OUT reaches 12.0 V within the first 0.02 ms and stays there.
Try this
What's inside
- 1× Battery
- 1× Resistor (120 Ω)
- 1× 7812