Site icon DCAClab Blog

How to use Multimeter in Lab

In order to use the multimeter in dcaclab you need to follow the steps below.

Steps to use Multimeter in DCACLab

Step 1: Navigate through the list of the devices/components and locate the symbol of multimeter as shown in image.

Step 2: Click on the icon of the multimeter as shown in the image above or grab the symbol, you will see the multimeter on the board.

Step 3: Set the mode and grab the cable in order to use the multimeter with the respective application.

How to measure DC Current in Ampere with Multimeter in DCACLab

In the above image shown the multimeter is set to measure the DC current up to 3A. The multimeter is connected in series to the circuit in order to measure the flow of current through the circuit.

How to measure DC Voltage with Multimeter in DCACLab

In the above image shown the multimeter is set to measure the DC voltage up to 3V. The multimeter is connected in parallel to the load to the circuit in order to measure the voltage being consumed by the Load on the circuit.

Measuring Resistance with Multimeter in DCACLab

In the above image shown the multimeter is set to measure the resistance (in Ω) of any electrical device or load.

You can play with the above circuit in here.

Exit mobile version